accessories

FO: Andraste

- Caitlyn

When I started knitting this, hot on the heels of Justin’s hat, I was certain the yarn was destined to become a Dragonflies Hat by Joji Locatelli. So certain, in fact, that when I made it to the crown decreases and realized the whole thing was turning out much too short, I immediately ripped everything out and started again on a larger needle. When I made it to the crown decreases a second time and it was still—inexplicably, disappointingly—too short, I spent a solid evening mulling over ways that I could fix it. A smarter knitter than I might be able to devise a way to repeat the pattern a third time, but I couldn’t tease out a solution, and I also couldn’t convince myself that adding another inch or two of ribbing wouldn’t disrupt the balance of the design.

After setting the pattern aside (with a promise to myself that one day I’ll knit the sweater version instead), I cast about my Ravelry favorites and decided on Droste Effect by Amy van de Laar, a free pattern from Knitty’s Deep Fall 2015 issue. Besides going up a needle size for both the ribbing and the body, I knit it exactly as written. I had a minor hiccup with the Decrease 5 to 1 instructions, but found helpful notes on another user’s project that had me speeding through in no time. While I love to lose an hour scrolling through all the loveliness in the pattern database, I think I’m most gratified when I can find—and give!—that little hint or nugget of knitting wisdom that turns an imminent failure into a success. In fact, my proudest knitting achievement to date is creating a project with notes that have helped 10 people.

What’s your proudest knitting (or crocheting, or sewing, or crafting) achievement?

FO: A Hat of His Own

- Caitlyn

When Justin and I were dating, I bought him a pair of red mittens for Christmas. After we’d gotten married but before I’d started knitting, I crocheted him a hat to match. It was made from Caron Simply Soft, it was solid red, and it was subtly textured, alternating two rounds of single crochet with a round of double (or was it half-double?) crochet. He wore it for a winter or two before he lost it, and it was another winter or two before I plucked up the enthusiasm to make a replacement.

By that time I’d started knitting, but only just, and I wasn’t confident in my ability to knit in the round. I didn’t want lack of muscle memory to slow me down or uneven tension to spoil the result, so I stuck to the crochet I was familiar with. I also went back to the same yarn and pattern. But because I made the replacement during an interstate drive and didn’t have Justin’s head handy for reference, I ended up increasing a few too many times, and the finished hat was too big around and much too long, even for his larger-than-average 24″ head. He wears it anyway, but with a sizable cuff at the bottom to keep it in place and out of his eyes.

Now, with more than a few successful knit hats in my collection, I felt the time had come to make Justin the better-fitting—and warmer!—hat he needed and deserved. Needed, because the red hat obviously no longer passes muster in this more experienced maker’s opinion, and the 3″ difference in our head sizes means we can’t share hats even if wanted to. Deserved, because he’s a reservoir of patience and support when it comes to my hobbies and a gracious recipient of anything I make—including less-than-stellar dinners and off-beat jokes—and therefore knitworthy (the lost hat notwithstanding).

So, hot on the heels of Jonah the D&D dice bag, here’s a wonderfully woolly, cabled hat for Justin. He picked out the (free) pattern, Brigid Hat and Mitts from Willow Yarns, and the yarn, madelinetosh Tosh DK in Chicory from Warm ‘n Fuzzy.

The hat is designed to fit a 21″ head circumference, which is pretty typical for adult hats and thus too small for Justin. To compensate, I added a repeat of the cable pattern but went down a needle size from the recommendation, finding the sweet spot that yielded a hat exactly 24″ around. For more technical details, check out my project page on Ravelry.

Like all hats, I found this one satisfying to knit because it practically flew off my needles—even after casting on, knitting through the first few rounds of the body, and then frogging and re-starting to get the right size, it only took me two weeks from start to finish. The cables were a little different than ones I’d knit before, because there are places where one crosses under another and then vanishes instead of continuing to travel away, but this kept things interesting for me. And because every cross was two-over-two, they were easy to accomplish without a cable needle and easy to fix if I made a mistake.

Justin’s been wearing the hat practically every day since it was finished, and he gets compliments on it any time we go out. He loves to tell people that I made it, and I love him for that. Knitworthy, indeed.

FO: Jonah

- Caitlyn

If there’s a list of the top 10 most contentious topics in crafting, surely selfish/unselfish creating is on it. For myself, I’m in the staunchly selfish camp. I tried my hand at a bit of unselfish sewing about half a decade ago, and it did not go well. In hindsight, the attempt was ill-advised, and had all the hallmarks of a project doomed to failure: keeping the project a surprise instead of consulting the intended recipient, using techniques and materials that were new to me, and sewing on a deadline all conspired to make it a less-than-stellar experience for me or the victim beneficiary of my well-meaning intentions. Since then, I’ve shied away from hand-making gifts, as I don’t trust myself to focus on what’s actually important—the desires of the receiver, rather than my desires as a maker-giver—and I’ve become rather jealous of my creative time anyway.

I broke my streak when Justin joined a Dungeons & Dragons group and asked me to knit him a dice bag. It’s his first grown-up D&D campaign, and thus his first opportunity to purchase a fancy set of dice. We had both seen knit, crochet, and hand-worked bags—in fact, one of the members of group has a handmade bag—but he wanted something special to commemorate what he hopes will be a long and prosperous (and non-fatal) adventure. His character, Odo Fridtjofsen, is a trident-wielding fisherman, and Justin felt that it would be appropriate to have a suitably themed bag to wrangle and transport his all-important dice. I couldn’t agree more.

Justin picked the pattern, the Fish Purse by Doreen Blask (available for purchase on Ravelry). He also picked the yarn,
Blue Moon Fiber Arts Super Sparkle in Sapphire, because of all the yarns at our LYS Warm ‘n Fuzzy, it reminded him of scales the most.

I made several alterations to the pattern. I knit it in a fingering yarn held double instead of a DK yarn held single; I used a US 3 to get a firm gauge without the possibility of holes. I omitted the scales but added a bottom fin that mirrors the top fin. Instead of creating I-cord drawstrings, I created two three-strand braids using six equal lengths of yarn for each braid. Before knotting each braid I added a sterling silver charm that Justin picked out. One is an anchor, the other a ship’s helm. I threaded both drawstrings through the eyelets so that the ends hang downward, like the barbels of a catfish. I omitted the shoulder strap as well.

Justin’s favorite part, and the thing I was most worried about, was replacing the knit eyes called for in the pattern with googly eyes. I wasn’t sure if we would be able to find sew-on ones, and when we did I wasn’t sure if they would be the right size (they’re 20 mm). Once I sewed them on, though, they proved to be exactly the thing to bring the whole project together.

Jonah is currently safeguarding 14 dice, but he could easily hold twice as many. He’s weathered several intense sessions already, and could easily outlast Odo if the party keeps up the shenanigans. Justin is more than pleased, and I’m happy to have made something he’ll treasure as much as his memories of the game.

Does this herald the beginning of more unselfish crafting? As a matter of fact, it does. 🙂 Stay tuned!

FO: Diversion

- Caitlyn

Last year was, for me, as for many people, not a particularly good year. When it came time to add this scarf to my notebook in Ravelry (I’ve fallen out of the habit of recording my projects in real time, and instead rely on notes taken throughout a project to summarize everything when it’s finished), that reality was driven home when I discovered that I had completed only one knitting project all year, a cabled hat. I had started a sweater, and re-started another, but neither came off the needles in those 366 days.

This scarf was the product of two forces. The first was a desire to overcome the deep creative block produced by a certain fingering-weight striped sweater that refused to be finished, and that I slowly came to regret starting at all. I’m not typically one to have multiple projects running concurrently—at least, not of the same craft—but I felt if I tried to remain monogamous with that particular project, I’d never knit again. A simple, soothing project that I could pick up and put down during a car ride or evening television seemed like exactly the thing I needed to keep me from quitting knitting entirely, without sending me down an ever-increasing spiral of other projects that would prevent me from finishing the sweater eventually.

The second force was a previously documented intense dislike for scraps. I don’t mind a remnant that’s large enough for a second, smaller project, or a yard or two of yarn that I can wind onto a bobbin in case future darning is required. But a couple dozen yards of yarn, too long to throw away without guilt? Hate them. I had just such a quantity of grey Cascade 220 Superwash Sport, left over from my Hermione Hearts Ron hat and Holding Hands with Ron gloves. The obvious solution was to use the yarn for stripes in a larger project.

The “pattern,” if you could call it that, is just a rectangle of ribbing, left unblocked so that it looks like stockinette but doesn’t curl at the edges. It’s a trick that I first learned about many years ago from Jared Flood’s Noro Striped Scarf, when I was a new knitter who spent more time reading about knitting than practicing the craft. For more technical details of my scarf (finished size, yardage, needles, etc.), check out my project on Ravelry.

The navy yarn is Rosy Green Wool Cheeky Merino Joy, a Global Organic Textile Standard (GOTS) certified superwash sport-weight wool and an absolute delight to knit and wear. It’s easily as soft as the wool-silk blends I’m fond of, with a wonderfully smooth hand and plump twist. I haven’t knit with many yarns, but of the ones I have experienced, this is easily my favorite. If I could only ever knit with one yarn again and this were it, it would be no tragedy.

This scarf proved to be exactly the diversion I needed from my other knitting challenges, and a balm for the stresses of life. (The only thing it didn’t turn out to be was the end of the grey yarn: while I did manage to use up all of the scraps from my other projects, shortly after weaving in the last end and crowing my triumph, I discovered another whole skein lurking in my stash.) It coordinates with my favorite hat and gloves, and it’s a welcome companion to my peacoat on frosty days, even if it doesn’t stand out against the coat’s navy wool. I’ve worn it several times a week since I finished it, and though I’ll be packing it away very soon as the weather warms up, I look forward to pulling it out again in the fall, and for many seasons to come.

Lest all my attempts at serious faces above lead you to believe that I don’t love the finished product, I’ll leave you with a few smiling photos as proof: